Renovating Slate Shower Cubicle Ruined by Limescale in Oxfordshire

This house in Wantage was on the market to be sold but many potential buyers had been put off by the poor condition of the Slate tiled shower cubicle. Wantage is a lovely little market town in the south of Oxfordshire and a desirable location to live.

However, before this house could be sold, the shower cubicle needed to be renovated; as you can see from the photos below, there was a heavy build-up of limescale that needed to be removed.

Slate Tiled Shower in Wantage Before Cleaning Slate Tiled Shower in Wantage Before Cleaning

With the property owner keen to sell the house, he asked me to get the shower cubicle back to looking its very best. This would involve a deep clean, acid wash and seal.

Cleaning Limescale Damaged Slate Shower Tiles

To begin the restoration, I cleaned the walls using Tile Doctor Pro Clean. This is a strong alkaline product which is powerful and sage to use on natural stone to eradicate dirt and residue that has built up over time. I scrubbed the Pro Clean into the tiles and grout lines, before rinsing the entire area with fresh water.

The next stage involved removing the heavy build-up of limescale. This was done using Tile Doctor Acid Gel, which is a blend of phosphoric and hydrochloric acids in gel form. Being in this form makes it especially effective for use on sloped and vertical surfaces as it it’s easier to control and can dwell for a long time where required. The product deals with alkaline-based limescale and mineral salt deposits (efflorescence).

I scrubbed the Acid Gel into the affected areas with a stiff nylon brush, before rinsing with fresh water. I then needed to repeat this process twice more to make sure all the limescale was completely removed. Following this, I left the shower to dry before sealing.

Sealing Slate Shower Tiles

After letting the shower cubicle tiles dry, I sealed them using Tile Doctor Colour Grow, which is an impregnating, colour-enhancing sealer.

The sealer is specially formulated to really emphasise the different natural tones and shades in the stone, in turn lifting the appearance of the entire room. In this situation, two coats of Colour Grow were used to provide robust, long-lasting protection.

Slate Tiled Shower in Wantage After Cleaning and Sealing Slate Tiled Shower in Wantage After Cleaning and Sealing

The customer was very impressed with the finished result and I’m sure any prospective property buyers will be equally impressed by the feature bathroom! Another satisfied client.
Source: Slate Tile Cleaning and Renovation Service in Oxfordshire

Removing Mould from Bathroom Shower Tiles

Having mould in your bathroom is never a desirable situation, especially in a family home with young children. Additionally, severe mould can cause a range of health issues, including respiratory problems, nasal congestion, and throat irritation, so it’s important to remove it as soon as possible.

I mention this as I was recently called out to a family home in Bedford recently because the parents were getting worried about the mould developing in the Ceramic tiled bathroom, especially on the lower tiles and silicon around the bath. Naturally, they wanted it to be removed as they didn’t want to expose their children to it, so a quote was issued and the work to restore the tiles was booked in for the following week.

Ceramic Tiled Bathroom Before Cleaning Bedford Town Centre Ceramic Tiled Bathroom Before Cleaning Bedford Town Centre

Cleaning and Sealing a Mouldy Ceramic Tiled Bathroom

Before starting the work, I covered the bathtub with dust sheets and towels to prevent any chemical spillages. Then, to begin, I applied Tile Doctor Mould Away which is specially formulated to removing mould and black spots from grout and silicone. This is quite a potent product, so it is advisable to wear protective gloves and goggles.
I sprayed the Mould Away on the entire area around the bath and shower unit, as well as the pedestal wash hand basin, before scrubbing it in by hand using a stiff brush. I left this to dwell while I started to cut out the old silicon from around the bath, and once this had been done, I rinsed the product off the tiles.

Next, I diluted a solution of Tile Doctor Grout Clean Up with water, this product contains concentrated phosphoric acid and is designed to remove grout haze, mineral deposits, and other smears. This solution was sprayed onto the worst-affected areas of the grout to remove any remaining soil deposits. I also gave the tiles a second rinse and, while the grout was drying, I finished cutting out and removing the old silicon.

Following this, I lightly dried all areas with a heat gun and sealed the grout with Tile Doctor Ultra-Seal, which is a natural-look, penetrating sealer deigned to provide maximum stain protection. Finally, I installed a fresh mould-resistant silicone sealant between the tile and bath to replace the old, mouldy silicone.

Ceramic Tiled Bathroom After Cleaning Bedford Town Centre Ceramic Tiled Bathroom After Cleaning Bedford Town Centre

Within a short day of work, I had managed to completely transform the appearance of this Ceramic tiled bathroom. The customer was extremely pleased with the result.

Mould problems are extremely common in small bathrooms with inadequate ventilation. Whilst the regular application of Tile Doctor Mould Away will keep the problem in check you can also improve the ventilation by leaving the bathroom door and a window open for a while after use.
Source: Bathroom Tile and Grout Cleaning and Restoration in in Bedford

Ceramic Tiled Shower Cubicle Cleaned and Recoloured in Glossop

Keeping shower cubicles clean can be extremely tough, especially as they constantly come into contact with shampoos and soaps containing acids that can damage the tiles. This was the case with this Ceramic shower cubicle at a property in Glossop, a small town in the High Peak area of Derbyshire, famous for its buildings constructed of locally produced Sandstone.

The property owner had attempted to clean the cubicle tiles on a regular basis using supermarket standard cleaners, but had never achieved the results they had hoped for. While the owner might have been able to complete a basic clean, they weren’t able to provide the tiles with any long lasting protection and thus, after a few months, they reverted to a dire state. Looking for some professional help, the owner called me down to see what could be done to improve the condition of the cubicle long term.

Shower Cubicle Before Restoration in Glossop

Shower Cubicle Before Restoration in Glossop

Cleaning a Dirty Ceramic Tiled Shower Cubicle

My main focus on cleaning the cubicle tiles was the grout, which was suffering from visible soap scum and soil build-up. I cleaned the grout firstly using Tile Doctor Grout Colourant Pre-Treat Cleaner, which successfully removes dirt, soil, soap scum and hard water deposits from grout joints.

Shower Cubicle Before Restoration in Glossop

Shower Cubicle Before Restoration in Glossop

The product was sprayed on to the grout and left to dwell and seep into the pores for approximately five minutes to break down the soap scum, before being scrubbed in using a grout brush. Following this, I rinsed the entire area with clean water and carefully removed the mouldy silicone around the shower cubicle.

Colouring and Siliconing a Ceramic Tiled Shower Cubicle

With the cleaning complete, my next task was to prepare the grout for colouring. To do this I completed a few damp tests on the grout and in the areas where I detected excess moisture I applied my heat gun to evaporate it. With the area dry, I recoloured the grout by applying two coats of the Tile Doctor Grout Colourant. This is an epoxy based paint that rejuvenated the appearance of the grout and sealed it, making it easier to clean in the future, and therefore resolving the customer’s cleaning difficulties.

Shower Cubicle After Restoration in Glossop

Shower Cubicle After Restoration in Glossop

After colouring the grout, I cleared the area and then siliconed all around the shower cubicle using high quality anti-mould silicone designed to last for several years to come. Once the restoration was finished, I advised the customer to start rinsing the
shower cubicle walls with clean water after every shower to get remove of all the acids produced by shampoos and soaps. This will keep the shower cubicle fresh by preventing the buildup of soap scum.

Shower Cubicle After Restoration in Glossop 14882

Shower Cubicle After Restoration in Glossop

The customer was surprised how good the outcome of the restoration was, especially considering that she previously had so much trouble getting the shower cubicle clean. Some pleased was she with the work that she said she and her partner will recommend me to all of their friends.
Source: Grout Cleaning and Colouring of a Dirty Ceramic Tiled Shower Cubicle in Derbyshire