Polishing Black Marble Shower Tiles back to health in Oxfordshire

I received a call regarding a Black Marble tiled shower that the customer thought he would clean himself and ended up unfortunately making worse. Black Marble adds a very opulent and elegant look to a bathroom, and I suspect this particular variety with the white veins is known as “Negro Marquina” which comes from the Basque region of Spain. I did a quick price check on-line and these tiles are priced around £60 each!

Black Negro Marquina Marble Shower Tiles Before Polishing Thame

If you look closely at the before picture you can see the Marble has lost its shine and has a cloudy appearance. This was due to the use of an acid based cleaner. Thame and Oxford lie in a hard water area, so we often find customers seek to remove Limescale deposits off tile using household products such as Vikal or Cillit Bang. The trouble with these products is they are acidic, and marble is acid sensitive so is easily marked and damaged by their use. You should always read the label before using any cleaner to check if its safe to use on natural stone.

The client was desperate to get the shower room looking how it should when he had selected this beautiful stone.

Cleaning a Marble Tiled Shower

To rectify the problem and restore the polished appearance of the marble I burnished the stone using a small 6 inch 200-grit diamond pad attached to a handheld buffer. This coarse pad cuts back the stone surface to remove the etching, I then used a 400-grit pad which removed the fine scratches made by the first pad. This was followed up with an 800-grit pad which starts the honing process which restores the polished appearance. Water is used to lubricate the process and the tiles are rinsed with water after each stage to remove the fine slurry that is generated.

This is further followed by 1500 and 3000 grit pads the last pad is applied dry with only a little bit of water and leaves the tiles dry and ready for the next stage.

Polishing a Marble Tiled Shower

To further build the polish and protect the stone I applied Tile Doctor Shine Powder buffed in with a white pad. This was applied to the marble wall tiles and then rinsed with water and wiped dry with a clean cloth. When the tiles were fully dry, I buffed the tiles with a clean white pad to show the final polished finish. The tiles looked much improved and very shiny.

Black Negro Marquina Marble Shower Tiles After Polishing Thame

The job was completed in a day and the customer was much relieved that I was able to restore the appearance of the marble. I suggested that he should use Tile Doctor Aqua Pro as his tile cleaner of choice in future. This is pH neutral so will not damage the tiles like the acidic products he had used previously, and it should help him keep the shower room looking sparkling and opulent as initially intended!

 

Source: Marble Tile Cleaning, Polishing and Sealing Service in Oxfordshire

Renovating a Mouldy Travertine Tiled Shower in Abingdon, Oxfordshire

This shower cubicle at a house in the historic market town of Abingdon on Thames was tiled with Travertine which with use had become grubby and the grout darkened. The properties in the road were of a similar age and many bathrooms had been upgraded in recent years to make them more modern. This one was no different having been fitted a few years prior.

Travertine Tiled Shower Before Cleaning Abingdon

Travertine is a natural stone material that has unique features and colouring that no other stone can offer. The distinctive design and natural patterns found within Travertine make it very popular choice in bathrooms, where it gives a luxury hotel style feel. It does however need to be maintained if you want it keep that luxury appearance and unfortunately due to the English climate and a general lack of adequate ventilation its quite common for them to attract mould and become stained with dyes from soaps and shampoos. The good news is we have a number of tools and products that we can use to restore their appearance, so they look like a new installation.

Deep Cleaning Travertine Shower Tiles

The main problem was the grout which was badly discoloured. To tackle this the Travertine and grout was sprayed with Tile Doctor Duo Clean and then scrubbed in with a hand brush to remove the mould and ground in dirt from the grout, I then rinsed with water. Duo Clean is a fast and effective double action grout cleaner and mould remover. It cleans up grout and can also remove mould and blackspot from the grout and silicone and it is versatile as it suitable for use on plastic and enamel baths and showers and will not cause any damage to them.

To restore the appearance of the stone I set about re-honing the Travertine tiles using six-inch diamond burnishing pads fitted to a hand buffer. The pads are applied in sequence starting with 400-grit, moving onto 800-grit and finishing with 1500-grit. Applied with water which acts as a lubricant, the process deep cleans and tightens the pores in the stone to improve overall appearance. The tiles are rinsed with water after each pad is applied to remove the soil that is generated.

Sealing a Travertine Tiled Shower Room

Another issue was the silicone strip between the wall tiles and the shower tray which was looking very mouldy and black. Using a sharp knife this was removed and replaced with fresh white mould resistant silicone.

Once the shower area was dry the Travertine wall tile and grout were then sealed with a couple of coats of Tile Doctor Colour Grow. This adds a preventative barrier over the tile and grout allowing water to easily run down the wall, it also improved the appearance of the stone and enhanced the natural brown colours in the Travertine. The customer was very happy with the shower room, it looked much more inviting and they were surprised that I had managed to restore it to the way it looked when it was originally installed.

Travertine Tiled Shower Before Cleaning Abingdon

 

Source: Travertine Tile Cleaning and Sealing Service in Abingdon, Oxfordshire

Renovating Porcelain Hallway Floor Tiles in Didcot

Available in a variety of styles and designs Porcelain tiles are harder than normal Ceramic tiles and are known for their durability and water resistance, making them ideal for use in shower cubicles and bathrooms.

However, as I’m sure most people already know, shower tiles are not the easiest to keep clean and fresh. These tiles are exposed daily to a multitude of acidic soaps and shampoo dyes, and if proper precaution is not taken to rinse away the excess after using the shower, mould will grow very quickly on the grout.

This shower cubicle, constructed from Porcelain tiles, is a typical example of this. As you can see from the photo below, the mould problem was very apparent. I was asked by the property owner, who lives in Didcot, a railway town in South Oxfordshire, to refresh it after what must have been years of neglect. Here’s how I did it.

Porcelain Shower Before Renovation in Didcot

Cleaning a Porcelain Tiled Shower Cubicle

The first process in restoring this shower cubicle was to spray the walls with Tile Doctor Duo Clean, which is both a grout cleaner and a mould remover. I left it to dwell for 45 minutes, before proceeding to scrubbing into the grout with a stiff brush. I worked in sections, spraying more Duo Clean onto the tiles as I moved along the length of the walls.

Following this, I rinsed the entire cubicle with fresh water to remove any traces of chemicals and used my wet-vac machine to dry it quickly. The next process was to remove the old, mouldy silicone and replace it with fresh silicone.

Sealing a Porcelain Tiled Shower Cubicle

With the shower cubicle now fresh and clean, it was now time for me to seal the grout and tiles.

I did this using Tile Doctor Wall Grout Sealer Spray, which is a water-based grout sealer that prevents oil, water and acid-based contaminants – including soaps and shampoos – from spoiling the appearance and colour of grout. It does this while allowing for moisture vapour transmission.

Check out the photo below – you can see that after a short day’s work, the appearance of the cubicle has been completely transformed. The customer was very pleased with the result and the addition of the sealer will ensure it stays this way for some time to come.

Porcelain Shower After Renovation in Didcot

 
 
Source: Shower Tile Cleaning and Renovation Service in Oxfordshire

Renovating Slate Shower Cubicle Ruined by Limescale in Oxfordshire

This house in Wantage was on the market to be sold but many potential buyers had been put off by the poor condition of the Slate tiled shower cubicle. Wantage is a lovely little market town in the south of Oxfordshire and a desirable location to live.

However, before this house could be sold, the shower cubicle needed to be renovated; as you can see from the photos below, there was a heavy build-up of limescale that needed to be removed.

Slate Tiled Shower in Wantage Before Cleaning Slate Tiled Shower in Wantage Before Cleaning

With the property owner keen to sell the house, he asked me to get the shower cubicle back to looking its very best. This would involve a deep clean, acid wash and seal.

Cleaning Limescale Damaged Slate Shower Tiles

To begin the restoration, I cleaned the walls using Tile Doctor Pro Clean. This is a strong alkaline product which is powerful and sage to use on natural stone to eradicate dirt and residue that has built up over time. I scrubbed the Pro Clean into the tiles and grout lines, before rinsing the entire area with fresh water.

The next stage involved removing the heavy build-up of limescale. This was done using Tile Doctor Acid Gel, which is a blend of phosphoric and hydrochloric acids in gel form. Being in this form makes it especially effective for use on sloped and vertical surfaces as it it’s easier to control and can dwell for a long time where required. The product deals with alkaline-based limescale and mineral salt deposits (efflorescence).

I scrubbed the Acid Gel into the affected areas with a stiff nylon brush, before rinsing with fresh water. I then needed to repeat this process twice more to make sure all the limescale was completely removed. Following this, I left the shower to dry before sealing.

Sealing Slate Shower Tiles

After letting the shower cubicle tiles dry, I sealed them using Tile Doctor Colour Grow, which is an impregnating, colour-enhancing sealer.

The sealer is specially formulated to really emphasise the different natural tones and shades in the stone, in turn lifting the appearance of the entire room. In this situation, two coats of Colour Grow were used to provide robust, long-lasting protection.

Slate Tiled Shower in Wantage After Cleaning and Sealing Slate Tiled Shower in Wantage After Cleaning and Sealing

The customer was very impressed with the finished result and I’m sure any prospective property buyers will be equally impressed by the feature bathroom! Another satisfied client.
 
 
Source: Slate Tile Cleaning and Renovation Service in Oxfordshire